DIN 2642 PN10 LOOS FLANGE
LAPPED FLANGE
Flange Dimensiounen & ongeféier Massen
| Däitschland Standard Flange DIN 2642 lapped Flange;Nominell Drock 10 | |||||||||||
| Lose Flansche Vorschweßbördel Glatte Bunde DIN 2642 Nenndruck 10 | |||||||||||
| Brides Tournantes: Nominell Nominatioun 10 | |||||||||||
| Päif | Flange | Schrauwen | Gewiicht | ||||||||
| Bewäert | d1 | D | d6 | b | k | e | Lächer | Fuedem | d2 | Kg | |
| ISO | DIN | ||||||||||
| 15 | - | 20 | 95 | 22 | 14 | 65 | 3 | 4 | M 12 | 14 | 0,689 |
| 21, 3 | - | 24 | |||||||||
| 20 | - | 25 | 105 | 28 | 14 | 75 | 3 | 4 | M 12 | 14 | 0,806 |
| 26, 9 | - | 30 | |||||||||
| 25 | - | 30 | 115 | 33 | 16 | 85 | 4 | 4 | M 12 | 14 | 1, 11 |
| 33, 7 | - | 36 | |||||||||
| 32 | - | 38 | 140 | 42 | 16 | 100 | 4 | 4 | M 16 | 18 | 1, 64 |
| 42, 4 | - | 46 | |||||||||
| 40 | - | 44, 5 | 150 | 50 | 16 | 110 | 4 | 4 | M 16 | 18 | 1, 86 |
| 48, 3 | - | 54 | |||||||||
| 50 | - | 57 | 165 | 62 | 16 | 125 | 5 | 4 | M 16 | 18 | 2,20 |
| 60, 3 | - | 65 | |||||||||
| 65 | 76, 1 | - | 185 | 81 | 16 | 145 | 5 | 4 | M 16 | 18 | 2, 62 |
| 80 | 88, 9 | - | 200 | 94 | 18 | 160 | 5 | 8 | M 16 | 18 | 3, 32 |
| 100 | - | 108 | 220 | 113 | 18 | 180 | 5 | 8 | M 16 | 18 | 3, 67 |
| 114,3 | - | 119 | |||||||||
| 125 | - | 133 | 250 | 138 | 18 | 210 | 5 | 8 | M 16 | 18 | 4,54 |
| 139,7 | - | 145 | |||||||||
| 150 | - | 159 | 285 | 164 | 18 | 240 | 5 | 8 | M 20 | 22 | 5, 60 |
| 168,3 | - | 173 | |||||||||
| 200 | 219,1 | - | 340 | 225 | 20 | 295 | 5 | 8 | M 20 | 22 | 7, 46 |
| 250 | - | 267 | 395 | 273 | 22 | 350 | 5 | 12 | M 20 | 22 | 10,30 |
| 273 | - | 279 | |||||||||
| 300 | 323, 9 | - | 445 | 329 | 26 | 400 | 5 | 12 | M 20 | 22 | 14.00 Auer |
| 350 | 355,6 | - | 505 | 362 | 28 | 460 | 6 | 16 | M 20 | 22 | 18,50 |
| - | 368 | 374 | |||||||||
| 400 | 406,4 | - | 565 | 413 | 32 | 515 | 6 | 16 | M 24 | 26 | 25.00 Auer |
| - | 419 | 426 | |||||||||
| (450) | 457 | - | 615 | 467 | 38 | 565 | 6 | 20 | M 24 | 26 | 30,60 |
| 500 | 508 | - | 670 | 517 | 38 | 620 | 6 | 20 | M 24 | 26 | 37.00 |
| 600 | 610 | - | 780 | 618 | 44 | 725 | 7 | 20 | M 27 | 30 | 56,30 |
| 700 | 711 | - | 895 | 721 | 50 | 840 | 7 | 24 | M 27 | 30 | 80,40 |
| 800 | 813 | - | 1015 | 824 | 56 | 950 | 7 | 24 | M 30 | 33 | 113,20 |
NOTÉIERT:
1. Fassung nach DIN 2526
Flaach Gesiicht:
Form A, Gesiicht ouni Ufuerderunge
Form B, Face Rz=160, machinéiert (net méi glat wéi 40µm)
Opgehuewe Gesiicht:
Form C, Face Rz=160, machinéiert (net méi glat wéi 40µm)
Form D, Face Rz = 40, machined
Form E, Face Rz = 16, machined
2. Zong a Groove nach DIN 2512
Form F, Zong
Form N, Groove
3. Männlech a Weibchen no DIN 2513, DIN 2514
Form V13, V14, männlech
Form R13, R16, Weiblech
4. Chemfering fir Membran-Schweißverpackungen, PN64-PN400, nach DIN 2695
5. Facing fir Lensfërmeg Gelenker, PN64-PN400, nach DIN 2696
Produktioun Kapazitéit & Kaf Detailer
1. Fourniture Flange Dimensioun DN15 - DN2000 (1/2" - 80"), Forged Flange.
2. Material Kuelestoff: RST37.2, C22.8, S235JR, ST37, P235GH, P245GH, P250GH, ASTM A105
3. Material Edelstol: ASTM A182 F304, F304L, F316, F316L, F321 etc.
4. Flanges Anti Rust: Anti Rust Oil, Black Paint, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized etc.
5. Mount Output: 3000 Tonnen pro Mount.
6. Liwwerung Konditioune: CIF, CFR, FOB, EXW.
7. Bezuelungsbedéngungen: Wire Transfer (T / T), Irrevocable L / C at Sight etc.
8. Minimum Bestellung Quantitéit: 1Ton oder 100Pcs.
9. Qualitéitsgarantie: EN10204 3.1 Zertifikat, Mill Zertifikat, Drëtt Partei Inspektioun, fräi Ersatz Service.
10. Fannt Méi Ufuerderunge An Flanges Maart.