DIN 2573 PN6 PLATE FLANGE
SLIP OP PLATE
Flange Dimensiounen & ongeféier Massen
| Däitschland Standard Flange DIN 2573 fir Löt oder Schweißen Nominal Pressure 6 | |||||||||||
| Flansche, glatt zum löten oder schweißen DIN 2573 Nenndruck 6 | |||||||||||
| Brides Placke a souder DIN 2573 Pressure nominale 6 | |||||||||||
| Päif | Flange | Schrauwen | Gewiicht | ||||||||
| Bewäert | d1 | d5 | D | b | c | k | Lächer | Fuedem | d2 | Kg | |
| ISO Serie 1 | DIN Serie 2 | ||||||||||
| 15 | - | 20 | 21 | 80 | 12 | 5 | 55 | 4 | M 10 | 11 | 0,41 |
| 21, 3 | - | 22 | |||||||||
| 20 | - | 25 | 26 | 90 | 14 | 5 | 65 | 4 | M 10 | 11 | 0,60 |
| 26, 9 | - | 27, 6 | |||||||||
| 25 | - | 30 | 31 | 100 | 14 | 5 | 75 | 4 | M 10 | 11 | 0,74 |
| 33, 7 | - | 34, 4 | |||||||||
| 32 | - | 38 | 39 | 120 | 16 | 5 | 90 | 4 | M 12 | 14 | 1, 19 |
| 42, 4 | - | 43, 1 | |||||||||
| 40 | - | 44, 5 | 45, 5 | 130 | 16 | 5 | 100 | 4 | M 12 | 14 | 1, 39 |
| 48, 3 | - | 49 | |||||||||
| 50 | - | 57 | 58, 1 | 140 | 16 | 6 | 110 | 4 | M 12 | 14 | 1,53 |
| 60, 3 | - | 61, 1 | |||||||||
| 65 | 76, 1 | - | 77, 1 | 160 | 16 | 6 | 130 | 4 | M 12 | 14 | 1, 89 |
| 80 | 88, 9 | - | 90, 3 | 190 | 18 | 7 | 150 | 4 | M 16 | 18 | 2, 98 |
| 100 | - | 108 | 109, 6 | 210 | 18 | 7 | 170 | 4 | M 16 | 18 | 3, 46 |
| 114,3 | - | 115, 9 | |||||||||
| 125 | - | 133 | 134,8 | 240 | 20 | 7 | 200 | 8 | M 16 | 18 | 4, 60 |
| 139,7 | - | 141,6 | |||||||||
| 150 | - | 159 | 161,1 | 265 | 20 | 7 | 225 | 8 | M 16 | 18 | 5, 22 |
| 168,3 | - | 170,5 | |||||||||
| 200 | 219,1 | - | 221,8 | 320 | 22 | 7 | 280 | 8 | M 16 | 18 | 7, 15 |
| 250 | - | 267 | 270,2 | 375 | 24 | 7 | 335 | 12 | M 16 | 18 | 9, 61 |
| 273 | - | 276,2 | |||||||||
| 300 | 323, 9 | - | 327,6 | 440 | 24 | 7 | 395 | 12 | M 20 | 22 | 12,60 |
| 350 | 355,6 | - | 359,7 | 490 | 26 | 7 | 445 | 12 | M 20 | 22 | 15,60 |
| - | 368 | 372,2 | |||||||||
| 400 | 406,4 | - | 411 | 540 | 28 | 7 | 495 | 16 | M 20 | 22 | 18,40 |
| - | 419 | 423,7 | |||||||||
| (450)* | 457 | - | 462,5 | 595 | 30 | 7 | 550 | 16 | M 20 | 22 | 21,40 |
| 500 | 508 | - | 531,6 | 645 | 30 | 7 | 600 | 20 | M 20 | 22 | 24,60 |
NOTÉIERT:
1. Fassung nach DIN 2526
Flaach Gesiicht:
Form A, Gesiicht ouni Ufuerderunge
Form B, Face Rz=160, machinéiert (net méi glat wéi 40µm)
Opgehuewe Gesiicht:
Form C, Face Rz=160, machinéiert (net méi glat wéi 40µm)
Form D, Face Rz = 40, machined
Form E, Face Rz = 16, machined
2. Zong a Groove nach DIN 2512
Form F, Zong
Form N, Groove
3. Männlech a Weibchen no DIN 2513, DIN 2514
Form V13, V14, männlech
Form R13, R16, Weiblech
4. Chemfering fir Membran-Schweißverpackungen, PN64-PN400, nach DIN 2695
5. Facing fir Lensfërmeg Gelenker, PN64-PN400, nach DIN 2696
Produktioun Kapazitéit & Kaf Detailer
1. Fourniture Flange Dimensioun DN15 - DN2000 (1/2" - 80"), Forged Flange.
2. Material Kuelestoff: RST37.2, C22.8, S235JR, ST37, P235GH, P245GH, P250GH, ASTM A105
3. Material Edelstol: ASTM A182 F304, F304L, F316, F316L, F321 etc.
4. Flanges Anti Rust: Anti Rust Oil, Black Paint, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized etc.
5. Mount Output: 3000 Tonnen pro Mount.
6. Liwwerung Konditioune: CIF, CFR, FOB, EXW.
7. Bezuelungsbedéngungen: Wire Transfer (T / T), Irrevocable L / C at Sight etc.
8. Minimum Bestellung Quantitéit: 1Ton oder 100Pcs.
9. Qualitéitsgarantie: EN10204 3.1 Zertifikat, Mill Zertifikat, Drëtt Partei Inspektioun, fräi Ersatz Service.
10. Fannt Méi Ufuerderunge An Flanges Maart.